Palm VIIX, Handbook

Page: 159 / 310

Chapter 5 Page 151
Sending messages
You can send wireless Internet messages anytime the handheld
antenna is raised and you are located within coverage of the Palm.Net
wireless communication service.
To send messages:
■
Tap Check & Send.
Tapping Check & Send sends the current message and all messages in
the Outbox. This command also downloads messages that are waiting
for you on the network.
You can store messages in the Outbox and then send them at another
time. For example, you can create messages and store them until
you’re in a location that is within coverage of the wireless
communication service.
To store messages and send them later:
1. Create a message.
2. Tap Outbox.
The message is stored in the Outbox.
3. If you have more messages to write, repeat steps 1 and 2.
4. Tap Check & Send when you’re ready to send the messages
waiting in the Outbox.
To cancel a wireless transaction:
■
In the Transaction Progress message box, tap Cancel.
Important: You incur a cost for the number of kilobytes you sent to
the server or downloaded before you tapped Cancel.
You can check the log to see which messages were sent.
To view a log of the most recent wireless transaction:
1. Tap the Menu icon .
2. Tap Options, and then tap Show Log.