Palm Tungsten Tungsten T Handhelds Handbook Download

Page: 81 / 290

Installing and removing applications

Tap the application that you want to remove.

Tap Delete.

Tap Yes.

Tap Done.

Removing Palm Desktop software

If you no longer want to use Palm Desktop software, you can remove it from your
computer.

This process removes only the application files. The data in your Users folder
remains untouched.

NOTE

You may need to modify the steps shown here to accommodate the version

of the operating system installed on your computer.

To remove Palm Desktop software from a Windows computer:

From the Windows Start menu, select Settings and then click Control Panel.

Double-click the Add/Remove Programs icon.

Click the Change or Remove Programs button.

Select Palm Desktop.

Click Change/Remove.

This process removes only the application files. The data in your Users folder
remains untouched.

Click Yes in the Confirm File Deletion box.

Click OK.

Click Close.

NOTE

If you want to synchronize data with another personal information manager

(PIM) you need to install the HotSync Manager from the Desktop Software CD-ROM.
During the installation select the Custom option and then choose to install only
HotSync Manager.

Summary of Contents for Tungsten Tungsten T Handhelds



































































































































































































































































































Search results

Summary of Contents for Tungsten Tungsten T Handhelds

Reviews:

Related manuals for Tungsten Tungsten T Handhelds

Brands by name

Popular brands

Palm Tungsten Tungsten T Handhelds, Handbook

Search results

Summary of Contents for Tungsten Tungsten T Handhelds

Reviews:

Related manuals for Tungsten Tungsten T Handhelds

Brands by name

Popular brands