Palm Tungsten Tungsten C, Handbook

Page: 266 / 444

Chapter 14 Using Palm™ VersaMail™ Personal E-mail Software
254
To set additional incoming mail options:
1.
On the Server Settings screen, tap Details.
2.
Tap the Options pick list and select Advanced Incoming.
3.
The incoming mail options are different depending on the connection type you
selected and the server protocol—POP or IMAP.
Port Number
Defaults to 110 for POP and to 143 for IMAP servers. If you
are not sure about the correct port number, check with your
mail server administrator.
Secure
Connection
Retrieves incoming mail over a secure (Secure Sockets Layer,
or SSL) connection. See
“Using Secure Sockets Layer (SSL)”
later in this chapter for information on SSL.
Leave mail on
server (POP only)
Leaves e-mail that you receive on the handheld on the server
also.
Use APOP
(POP only)
Encrypts your username and password when traveling over
the network. Some services require APOP to work properly,
while others do not work properly if APOP is used. If you
aren’t sure if your ISP or web e-mail provider supports
APOP, check with your e-mail provider. See
“Adding APOP
to an account” later in this chapter.
Mailbox (IMAP
only)
Defines the root mailbox on your IMAP server.
POP accounts IMAP accounts