Palm Tungsten T2 Handbook Download

Page: 206 / 502

Chapter 17

Using Palm™ VersaMail™ Personal E-mail Software

192

Enter the name of your incoming (POP) mail server, such as
pop.mail.yahoo.com.

If the VersaMail application knows the incoming mail server name based on the
mail service you selected, the correct server name is displayed.

Enter the name of your outgoing (SMTP) mail server, such as
smtp.mail.yahoo.com.

If the VersaMail application knows the outgoing mail server name based on the
mail service you selected, the correct server name is displayed.

Tap Next.

Do one of the following:

– To accept these mail options and begin using the VersaMail application, tap

Done. After you finish setting up a synchronize-only e-mail account, you
need to configure this account on your desktop. See

“Configuring an account

in HotSync Manager”

later in this chapter for information. You will not be

able to synchronize e-mail between your handheld and your desktop until
you configure the account on your desktop.

– To set up additional mail options, tap Next. Continue with the next set of

procedures.

Setting mail retrieval options for a POP or IMAP account

The next VersaMail Setup screen displays different options, depending on whether
your mail service uses a POP or an IMAP protocol.

Summary of Contents for Tungsten T2























































































































































































































































































































































































































































































































Search results

Summary of Contents for Tungsten T2

Reviews:

Related manuals for Tungsten T2

Brands by name

Popular brands

Palm Tungsten T2, Handbook

Search results

Summary of Contents for Tungsten T2

Reviews:

Related manuals for Tungsten T2

Brands by name

Popular brands