Palm Tungsten T2, Handbook

Page: 166 / 502

Chapter 14 Using Phone Link
152
To configure Bluetooth settings for your phone connection:
1.
Place your phone into the mode where it can accept Bluetooth pairing from
another device. See the documentation that came with your phone for details.
2.
Wait for your handheld to discover your phone.
When your handheld discovers a Bluetooth phone, it displays a screen similar
to the screen that follows.
3.
Select your phone from the list.
If your phone doesn’t appear on the list, tap Find More, and select your phone’s
name when it appears on the list.
4.
Tap Next.
Your handheld connects to your phone.
5.
When prompted to create a trusted connection, tap Next.
6.
Enter a passkey for this connection on your phone, and then tap OK.
A passkey is a unique identifier that enables secure data exchange between two
Bluetooth devices that have formed a connection with one another. The passkey
is stored on both devices. You must enter the same passkey on both your
handheld and phone. If Phone Link is unable to validate the same passkey on
both your handheld and your phone, an error message appears and you are
given the option to try connecting again. If you need additional information
about connecting your phone, refer to the
Phone Pairing Handbook at
www.palm.com/support/globalsupport
.