Palm PalmTM ZireTM Handheld, Handbook

Page: 171 / 208

Network preferences and TCP/IP software
161
3.
Tap the command you want from the Command list. If the command requires
additional information, a field appears to the right of it for you to enter the
information. The following commands are available:
4.
Repeat steps 2 and 3 until the login script is complete.
5.
Tap OK.
Deleting a service template
There is only one way to delete a service template: use the Delete command from
the Service menu.
To delete a service template:
1.
Tap the Service pick list.
2.
Tap the service template you want to delete.
3.
Tap the Menu icon .
4.
Tap Service, and then tap Delete.
5.
Tap OK.
Wait For
Tells your handheld to wait for specific characters from the
TCP/IP server before executing the next command.
Wait For
Prompt
Detects a challenge-response prompt coming from the server
and then displays the dynamically generated challenge value.
You then enter the challenge value into your token card, which
in turn generates a response value for you to enter on your
handheld. This command takes two arguments, separated by a
vertical bar (|) on the input line.
Send
Transmits specific characters to the TCP/IP server to which you
are connecting.
Send CR
Transmits a carriage return or LF character to the TCP/IP server
to which you are connecting.
Send User ID
Transmits the User ID information entered in the User ID field of
the Network Preferences screen.
Send
Password
Transmits the password entered in the Password field of the
Network Preferences screen. If you did not enter a password, this
command prompts you to enter one. The Password command is
usually followed by a Send CR command.
Delay
Tells your handheld to wait a specific number of seconds before
executing the next command in the login script.
Get IP
Reads an IP address and uses it as the IP address for your
handheld. This command is used with SLIP connections.
Prompt
Opens a dialog box and prompts you to enter text of some kind
(for example, a password or a security code).
End
Identifies the last line in the login script.