Palm P80880US - Tungsten E - OS 5.2.1 126 MHz Handbook Download | Manualshive

Page: 182 / 318

background image

Chapter 13

Using Palm™ VersaMail™ Personal E-mail Software

172

2.

Tap the area below the Subject line, and then enter the text of your e-mail.

To access the editing features available on the Edit menu, tap the Menu icon

.

The first character of each sentence is automatically capitalized for you.

3.

(Optional) Tap the Options menu, and then select Add Attachments. See

“Attaching files from a handheld application”

later in this chapter.

4.

Tap one of the following to send the e-mail:

TIP

You can also tap Drafts to save this message in the Drafts folder rather

than send it.

Send retry

When you tap Send on the message menu, the VersaMail application automatically
attempts to send the message. If the send attempt fails for any reason (for example,
your handheld is out of range, or the application cannot connect to the mail server),
you can choose to have the application move the message to the Outbox and
continue to try to send the message at 30-minute intervals, a maximum of three
times.

If you put a message in the Outbox, you must perform a manual send to send the
message on the first attempt. The VersaMail application attempts automatic send
retry only after a manual send attempt fails.

If automatic send retry succeeds on any attempt, the message is moved to the Sent
folder.

NOTE

Automatic send retry occurs only if you tap Send to send the message

manually. It does not work if you tap Get & Send.

Send

Sends the e-mail immediately.

Outbox

Stores e-mail in the Outbox so you can compose e-mail offline and
then send all e-mail during one connection with the server. To send
your e-mail later, tap Get & Send. A connection is made to the mail
server and all the e-mail in the Outbox is delivered.

«
...
180
181
182
183
184
...
»

Summary of Contents for P80880US - Tungsten E - OS 5.2.1 126 MHz































































































































































































































































































































Reviews:

No comments

Related manuals for P80880US - Tungsten E - OS 5.2.1 126 MHz

Brand: Unitech Pages: 204

Brand: M3 Mobile Pages: 119

Brand: Datalogic Pages: 36

MED-SPELL SME-106

Brand: Franklin Pages: 20

Brand: A.I. HARDWARE Pages: 26

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands