Palm P80870US - Tungsten T3 - OS 5.2.1 400 MHz Handbook Download Page 146

Page: 146 / 408

Chapter 14

Using SMS

132

Viewing messages

SMS stores your messages in five categories:

To view text messages in your Inbox:

Tap the category pick list in the upper-right corner.

Tap Inbox.

Tap the message you want to view.

Tap one of the following:

Inbox

Stores messages downloaded from your phone.

Outbox

Stores messages waiting to be sent.

Trash

Stores messages you deleted. You can restore deleted messages to
their original category.

Archive

Files messages you want to keep.

Draft

Stores messages you want to change or review before you send
them.

Done

Returns to the list view.

Reply

Creates a message to the sender and copies any selected text into
the new message.

Delete

Moves the message to the Trash category.

Message contains data
from an application

Unread
message

Read
message

Summary of Contents for P80870US - Tungsten T3 - OS 5.2.1 400 MHz

























































































































































































































































































































































































































Search results

Summary of Contents for P80870US - Tungsten T3 - OS 5.2.1 400 MHz

Reviews:

Related manuals for P80870US - Tungsten T3 - OS 5.2.1 400 MHz

Brands by name

Popular brands

Palm P80870US - Tungsten T3 - OS 5.2.1 400 MHz, Handbook

Search results

Summary of Contents for P80870US - Tungsten T3 - OS 5.2.1 400 MHz

Reviews:

Related manuals for P80870US - Tungsten T3 - OS 5.2.1 400 MHz

Brands by name

Popular brands