Palm P80860US - Tungsten T2 - OS 5.2.1 144 MHz, Handbook

Page: 111 / 502

Scheduling an event
97
TIP
You can also use the Graffiti
®
2 writing area to open the Set Time dialog
box. Make sure that no event is selected, and then on the number side of the
Graffiti
2 writing area, write a number for the start time of the event.
4.
Do one of the following:
– Tap the time columns on the right side of the Set Time dialog box to set the
start time, and then tap the End Time box and tap the time columns to set the
end time.
– Tap All Day to automatically insert the start and end time of the event as
defined in your Date Book Preferences.
5.
Tap OK.
6.
Tap a blank area of the screen to deselect the event. A vertical line appears next
to the time, indicating the duration of the event.
If two or more events have the same start and end time, the time appears only
once.
To schedule an event for another day:
1.
Select the date you want for the event by doing one of the following:
– Tap the day of the week that you want in the date bar at the top of the screen.
If necessary, tap the Previous week or Next week scroll arrows to move to
another week.
– Press Right or Left on the navigator to scroll to the next or previous day.
Start Time
highlighted Tap to scroll to
earlier hours
Tap to scroll to
later hours
Tap to change
hours
Tap to change
minutes
Tap to automatically
fill the start and end
times
Tap to create an
untimed event
Previous
week Next
week
Tap to select a day of
the current week