Palm i700 Series Handbook Download Page 20

Page: 20 / 238

Chapter 2

Exploring Your Handheld

Handheld components

Take a few moments to locate the front and back panel components of your
handheld.

Locating front panel controls

IR port

Uses infrared technology to transmit data to and receive data
from other Palm OS handhelds, and to perform HotSync
operations. See

and see

or more information.

Red and green
indicator light

Indicates when you are within or out of range for wireless
transmission. It also notifies you of incoming e-mail, or Date
Book/Clock/Note Pad alarms.

Stylus

Slides in and out of the slot in the side channel of the
handheld. To use the stylus, remove it from the slot and hold
it as you would a pen or pencil. Unscrew the top of the stylus
to access the reset tool.

Screen

Graffiti

writing

area

Application buttons

Scroll
buttons

Power button/
Backlight control

Red and green indicator light

Antenna cap

Stylus

IR port

Date
Book

Address
Book

Wireless

MultiMail

Deluxe

Summary of Contents for i700 Series















































































































































































































































Search results

Summary of Contents for i700 Series

Reviews:

Related manuals for i700 Series

Brands by name

Popular brands

Palm i700 Series, Handbook

Search results

Summary of Contents for i700 Series

Reviews:

Related manuals for i700 Series

Brands by name

Popular brands