Appendix B
Page 193
Operating problems
Problem
Solution
I don’t see anything
on my handheld’s
screen.
Try each of these in turn:
■
Press an application button to ensure
your handheld is turned on.
■
Tap the Contrast icon
in the upper-
right corner of the Graffiti
®
writing area.
If the Contrast dialog box appears,
adjust the contrast by holding down the
up scroll button for a few seconds. If this
doesn’t work, hold the down scroll
button for a few seconds.
■
If your handheld was exposed to cold,
make sure it is at room temperature.
■
Make sure the batteries are fresh and
properly installed.
■
Perform a soft reset. If your handheld
still doesn’t turn on, perform a hard
reset. See “Resetting your handheld” in
Appendix A.
Important:
With a hard reset, all records
and entries stored in your
handheld are erased. Never
perform a hard reset unless a
soft reset does not solve your
problem. You can restore any
data previously synchronized
with your computer during the
next HotSync
®
operation. See
“Performing a hard reset” in
Appendix A for instructions on
restoring your data.
Summary of Contents for Handhelds m100
