I M P O R T A N T S A F E T Y A N D L E G A L I N F O R M A T I O N
85
Important safety and
legal information
FCC Notice
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Antenna Care/Unauthorized Modifications
Use only the supplied integral antenna. Unauthorized antenna
modifications or attachments could damage the unit and may violate
FCC regulations. Any changes or modifications not expressly
approved by the party responsible for compliance could void the
user's authority to operate the equipment.
FCC RF Safety Statement
In order to comply with FCC RF exposure safety guidelines, users
MUST use one of the following types of bodyworn accessories.
•
A Palm
™
brand body-worn accessory that has been tested for
SAR compliance and is intended for use with this product.
•
An accessory that contains NO metal (snaps, clips, etc.) and
provides AT LEAST 1.5 cm of separation between the users body
and the unit.
Do NOT use the device in a manner such that it is in direct contact
with the body (i.e., on the lap or in a breast pocket). Such use will
likely exceed FCC RF safety exposure limits See www.fcc.gov/oet/
rfsafety/ for more information on RF exposure safety.
The highest reported (FCC) SAR values of the Palm
®
Centro
™
smartphone, by Palm are:
FCC Radiofrequency Emission
This smartphone meets the FCC Radiofrequency Emission
Guidelines and is certified with the FCC as:
FCC ID number: O8F-895.
More information on the smartphone's SAR can be found from the
following FCC Website:
https://fjallfoss fcc gov/oetcf/eas/reports/GenericSearch cfm
FCC Hearing Aid Compatibility
Your smartphone is compliant with
the FCC Hearing Aid Compatibility (HAC) requirements. For additional
HAC information, including the HAC rating of this product, please
refer to www.palm.com/treoHAC.
Static Electricity, ESD, and Your Palm
®
Device
Electrostatic discharge (ESD) can cause damage to electronic devices
if discharged into the device, so you should take steps to avoid such
an occurrence.
Description of ESD
Static electricity is an electrical charge caused
by the buildup of excess electrons on the surface of a material. To
most people, static electricity and ESD are nothing more than
annoyances. For example, after walking over a carpet while scuffing
Maximum SAR
Values
Cellular
PCS
Held to Ear
1.07 (W/1Kg)
1.46 (W/1Kg)
Body - Worn
0.89 (W/1Kg)
0.33 (W/1Kg)
Summary of Contents for Centro
