ILK
22/33/44/55/66
I
NSTALLATION
M
ANUAL
Revision 1.6
- 19 -
5.3
Bolt-On Mount Plate Installation
– ILK 22/33/44/55
IMPORTANT: When drilling into the vehicles C-Channels, make sure to observe the vehicle
manufacture’s guidelines and recommendations before drilling.
When installing the mount plates on a C-Chassis use the following amount of bolts listed below
along with their torque specificaitons:
Model
No. of Bolts
Bolt Type
Torque Specification
ILK 18
4
14 x 1.5
St. 10.9
140 ft./lbs. [140 Nm]
ILK 22
4
ILQ 22
4
ILK 33
6
ILK 44-55
10
ILK 66
14
Before If it is necessary to perform any welding make sure to slide out the power pack out of
the mount tube to prevent any damage to the oil tank.
Bolt Spacing
1.
Space bolts approximately 2” from the edge of the plates.
2.00"
2.00"
