6 0 1 P A R R B O U L E V A R D , R I C H M O N D , C A 9 4 8 0 1
T . 8 0 0 . 2 7 4 . 7 7 3 0 | F . 5 1 0 . 2 3 4 . 7 2 3 4
P A L E C E K . C O M
MONTERRA DINING TABLE INSTALLATION INSTRUCTIONS
These instructions are provided for your convenience. It is very important that they are read carefully and completely before beginning installation
of this item.(Applies to items 7840-03)
TO ASSEMBLE:
TOOLS NEEDED:
1. Allen Wrench (included).
ITEM 7840-03
Table Base
Mending
Board Base
1. Unbox all components onto a non scratching surface.
2. Ensure the TABLE BASE is in an upright position.
3. Carefully place MENDING BOARD BASE onto TABLE BASE, aligning the screw holes.
4. Insert a LOCK WASHER and a FLAT WASHER onto a HEX SCREW, and insert into the twelve (12) holes
indicated in Diagram #1. Tighten with the included ALLEN WRENCH.
5. Place the TABLE TOP upside down on a non scratching surface.
6. Place the MENDING BOARD TOP onto underside of TABLE TOP, aligning the holes.
Diagram #1
Diagram #2
Table
Top
Mending
Board Top
Hex Screw
