2
For your safety
6062-en_V2.4_02/21
7
2
For your safety
2.1
Hazards and safety instructions
Qualified person
1.
Only a properly qualified person may perform installation,
commissioning and any other work on the device.
2.
Follow the generally accepted codes of practice when installing the
device.
Operate only
undamaged equipment
1.
After unpacking the device, check that all components are in pristine
shape and are not damaged in any way.
2.
To ensure safety, never operate damaged components. Consult the
manufacturer.
Safe operation of the
device
1.
If the device is operated connected to an electrical outlet: Connect the
power cable to an outlet with a residual current circuit breaker.
2.
Only operate the device with the insulation and/or casing fully installed.
3.
Make sure that the housing and/or the casing on the device is
undamaged, complete, and correctly installed.
Safe use of the device
1.
Do
not
use the device in a flammable or explosive environment, e.g.
rich in hydrogen or oxygen.
2.
Do
not
use the device with flammable or explosive carrier gases, e.g.
rich in hydrogen or oxygen.
Compliance with work
regulations
4
Comply with the accident prevention regulations issued by the
employers’ liability insurance association as well as with local and
national work regulations.
Radio radiation -
protection of other
devices
The device contains a WiFi module that generates, uses and radiates radio
frequency. This radiation can disrupt other equipment.
1.
Use the device only where permitted!
2.
Do not use the device if it could impact electronic equipment or
potentially cause other hazards.