Palas AQ Guard, Operating Manual, Page: 22 / 90

4 Initial commissioning
22 6062-en_V2.4_02/21
4 Initial commissioning
4.1 Overview
Initial commissioning of the device includes the following tasks:
• Unpacking the device
• Mounting wall bracket
• Checking the device status; refer to the section " Menu Device Status
[
}
39] ”
• Refer to the section " Checking for Leakage [ } 24] ”
• Optional: Activating transfer protocol; refer to the section " Menu
Communication [
}
41] ”
Setup time: The tasks listed above take about 30 minutes to complete.
4.2 Mounting wall bracket
Safety
With the included wall bracket, the device can be mounted in places that are
not accessible from the ground. Use suitable aids that ensure safe access
during work. These include a sturdy ladder or a platform with railing.
WARNING
Risk of injury due to unsuitable climbing assistance
Unsuitable climbing aids can cause loss of stability and lead to falls. This
can result in serious injury or death.
4
Use only climbing assistance suitable for the specific purpose
4
Comply with all applicable regulations and laws pertaining to
occupational safety.
Wall bracket Proceed as follows to wall-mount the device:
1. Unscrew the wall bracket from the device (one screw with AQ Guard /
three screws with AQ Guard Ambient ).
2. Mount the wall bracket where it is needed.
3. Place the device on the wall bracket and screw securely.