manualshive.com logo in svg

Palas AQ Guard, Operating Manual, Page: 11 / 90

Share
Download
Palas AQ Guard Operating Manual Download Page 11

2  

For your safety

6062-en_V2.4_02/21

11

2.4

Regulations

Observe the following regulations and directives:

Statutory regulations

• Legal regulations for accident prevention
• Legal regulations for environmental protection
• Employer's Liability Insurance Association provisions

Standards and directives

• The applicable safety requirements according to DIN, EN, and VDE

2.5

Obligations of the user

To ensure proper functioning of the device, observe the following:

1.

Carefully read through the manual before using the device.

2.

Keep the manuals in the vicinity of the device to ensure that
information can be checked at all times.

3.

Only carry out activities described in the manual intended for your use.

4.

Make sure that the required inspections and maintenance tasks are
carried out.

5.

Have the device serviced by the manufacturer or an authorized
distributor.

6.

Have damage to the device repaired promptly by the manufacturer.

Summary of Contents for AQ Guard



























































































Reviews:

No comments