manualshive.com logo in svg

Palas AQ Guard, Operating Manual, Page: 10 / 90

Share
Download
Palas AQ Guard Operating Manual Download Page 10

2

  For your safety

10

6062-en_V2.4_02/21

2.3

Warnings

The warnings in this manual are highlighted with pictographs and signal
words. The severity of a hazard is indicated by the pictograph and signal
word.

Layout of the warnings

The warnings that precede each action are shown as follows:

 DANGER

Type and source of the hazard

Explanation of type and source of the hazard / description of
consequences of failure to comply with the warning.

4

Measures to avert the hazard

Meaning of the signal words

DANGER

Immediate danger to life or risk of severe physical
injury if this hazard is not avoided.

WARNING

Possible risk of severe physical injury if this hazard is
not avoided.

CAUTION

Possible risk of minor physical injury if this hazard is
not avoided.

NOTICE

Damage to property if this hazard is not avoided.

Meaning of the pictographs

DANGER

Warnings with information about the severity of the hazard

DANGER

Danger to life due to electric shock

NOTICE

Damage to property

Summary of Contents for AQ Guard



























































































Reviews:

No comments