C36
User Manual V1.2
You can change the channel and transmit power under the Channel and Power options. Make sure you
click
after making the changes.
LED Controls
The C36 is able to configure LEDs on your access points. Click the On/Off switch to change the power
status of your WK-1/WX-1 LEDs.
AP Reboot
The AP reboot section will allow you to either individually reboot an access point or multiple access points
at once. To reboot an access point, simply click on the checkbox next to an access point.
Access Point Firmware
The AP firmware can be upgraded from the cloud. The controller always checks for the latest AP firmware
on the cloud and compares it against the firmware running on your AP. If you have an outdated firmware,
the controller will give you the option to update to the latest version.
Re-Scan:
after updating the firmware, you can do another scan to detect the new firmware on the AP(s)
and verify they are all on the correct version.
