Quick Start
1.
Easy as 1, 2, 3.
Remove parts from bag and make
2 stacks, starting with sections 3
and 4.
Open hatches, engage clamps.
4 on both bulkheads, 3 each in
sections 1 and 6. Push clamp
jaws onto pin, push handle down.
Now that your boat is assembled, please follow these instructions:
Inspect:
Inspect the box for all parts. There should be a bag with 6 kayak parts, a seat, and a towel. If anything is
missing, please contact us right away at [email protected].
Keep:
In case you need to return your Pakayak product, it will need to be in the original box with all the packing, so
please keep your box until you have tried your Pakayak product.
Try:
We recommend that you assemble your Pakayak on a carpeted surface inside or on a soft surface (like a blanket on
the grass) and test out the fit before you try it in the water. When you test it in the water, carefully set it in the water and be
sure not to rub or drag it against any rough surfaces. If your Pakayak product is scratched or gouged, it will not be eligible
for return and refund.
Register:
Don’t forget to register your boat at
pakayak.com/register
Tips:
Visit
pakayak.com/pak-members
for all kinds of information and help. Get to know your boat, how to
assemble and disassemble, recommended care instructions and download the Owner’s Manual. If you have any issues with
your boat, go to
pakayak.com/warranty
Welcome to the PAK!
Thank you for purchasing a Bluefin
14. We hope you’ll love it! See full
instructions at
pakayak.com/
assembly
IMPORTANT!
• Remove any debris from gaskets before assembling.
• The clamps have a self-locking tab and a spring that keeps them open when not latched. If a clamp is not
latched correctly, it will spring open. Be sure the self-locking tab is engaged when clamp is latched.
• Make sure all 19 clamps are locked.
2.
3.
Tip:
Place foot on 2 in bag to release 4.
Tip:
Watch a virtual demo at
pakayak.com/demo
and for more tips, go to
pakayak.com/quick-start-guide
Tip:
Look inside first to see clamp locations.
Lay 2 towers down, clamp together
starting with middle bottom clamp.
Clip seat in. Test on soft surface.
www.pakayak.com
Tip:
If you have tender hands, wear
gloves to get familiar with clamps.