PROFESSIONAL Finder 3.0 by PAJ with Online-Tracking V.1.1 EN
© PAJ UG (haftungsbeschränkt)
19
for you, you can also install the buttons in the
engine compartment.
(2.)
Connect the black and red thin cables to the
battery. The red line with the fuse must be
connected to positive pole (+). The black cable
must be connected to negative pole (-).
ATTENTION!
The poles must never be reversed
Incorrect connections can damage the charging
cable or the PROFESSIONAL Finder 3.0
Note: When connected to the power supply, the
PROFESSIONAL Finder 3.0 switches on immediately
and the LED lights emit a signal.
2.7
Switching on
If activation is successful, you can switch on the
PROFESSIONAL Finder 3.0.
By connecting the FINDER to the power supply it has
already been switched on.
However, leave the switch set to "on" so that in case
of theft, if the FINDER is disconnected from the
external power supply, data can still be transmitted.
For the initial startup of the PROFESSIONAL Finder
3.0 uncovered locations, such as the garden or the
terrace (i. e. not inside the home, the garage, the
cellar or the like) are recommended.
2.8
Use
Once the activation, switching on and the transfer of
a first database has been successful, you can attach
the FINDER to a location of your choice and view the
position of the FINDER using a smartphone, tablet or
PC. Please use our app or go to the following website:
www.finder-portal.com
The portal will support you step by step in its
functions.
Battery 12-24V
Black
Red
2.
1.
SOS
button
Red/
Black
