15
2.5 Installation
Install the machine at a level solid base taking care that front and back of the machine is having free access to
the ambient air. Since the efficiency of the Dryer is directly related to the ambient temperature, air inlet
temperature and air pressure. It is very essential that the Dryer be installed in a room having sufficient
ventilation.
A suitable moisture separator must be installed just before the Dryer inlet or before the pre filter, if one is being
sold along with the Dryer. For best results condensed moisture/oil etc. Must not be allowed into the Dryer inlet.
Air from the compressor is to be connected to the Dryer inlet via moisture separator / pre filter in that order }
Connect the inlet and outlet points ( figure 2.2 ) to the respective points in the pipe lines, all the pipe
connections should be leak proof and such that these do not stress the Dryer outlet and inlet pipes.
Figure 2.2
figure 2.3
Check the manual water drain valve ( figure 2.3 ) and ensure it to be closed. Your Dryer is now ready for
operation. Connect the Dryer main lead to 220v. Ac supply through an automatic voltage stabilizer
{importantly of suitable rating in case the same is desired due to heavy fluctuation in the load.
Important note
–
1.
We recommend a minimum 600 mm of space be provided for future service and proper air ventilation.
2.
Also ensure that ambient and other inlet parameters are as per design.
3. UNIT Should be properly earthed for its smooth functioning.
Summary of Contents for Delair RD 220
Page 1: ...1 ...
Page 25: ...25 Annexure i ...
