U5007A PAGLOK POWER MODULE INSTRUCTION MANUAL
U5007A PAGLOK POWER MODULE INSTRUCTION MANUAL
CONTENTS
SECTION
PAGE
1
INTRODUCTION
2
2
SPECIFICATION
2
3
OPERATING INSTRUCTIONS
4
4
CARE & MAINTENANCE
5
5
WARRANTY
6
Model No.'s 9661 & 9663
Instruction Manual
PAGlok Power
Module
1.1
The PAGlok Power Module is a compact unit which can utilise up to
three batteries to supply continuous power for editing equipment,
remote cameras or microwave links.
1.2
Two PAGlok Power Modules can be linked together, allowing up to
five batteries to be utilised.
1.3
Nickel-Cadmium, Nickel-Metal Hydride and Lithium-Ion batteries
may be used. At no time are any two batteries electrically
connected, allowing any mix of these chemistries to be used with
the PAGlok Power Module.
1.4
Model No. 9663 incorporates the additional feature of an integral
DC-DC converter, enabling the continuous powering of equipment
which requires a 7.2V power source.
INTRODUCTION
SECTION 1
SPECIFICATION
SECTION 2
2.1
Model Range:
Model No. 9661: Standard Model.
Model No. 9663: As above but with 7.2V output.
Model No. 9664: Interconnecting lead to link two Power Modules.
2.2
Battery Voltage:
Nominal 13.2V and 14.4V. NOTE: 12V batteries may be used, but
will be discharged by only 50% to 60%.
2.3
Battery Type:
Nickel-Cadmium, Nickel-Metal Hydride or Lithium-Ion.
NOTE: Lead-acid batteries are unsuitable for use with the PAGlok
Power Module.
2.4
Maximum Voltage:
20V.
2.5
Output Rating:
XLR-4 Output:
Maximum continuous current 12A. The output is
protected against short circuit and over-current.
1
2
