PAG CPS100
On-Camera Power Supply
Models 9750, 9750A & 9750V
IMPORTANT SAFETY INSTRUCTIONS
This leaflet contains important safety and
operating instructions. Read these fully and
note all warnings before using the PAG
CPS100 Camera Power Supply. Please follow
all instructions and retain this leaflet for
future reference.
The PAG CPS100 is not intended for any use
other than the powering of video cameras as
detailed in ‘Specification’.
IMPORTANT: This equipment must be grounded.
Do not connect to non-grounded supplies.
Use only on AC supplies 100-250V, 50/60Hz.
Supply connection to the unit should be
made using only the standard lead supplied
with this equipment. Do not defeat the
safety purpose of the grounding-type plug.
The grounding-type plug has two blades and
a third grounding prong. The third prong is
provided for your safety. When the provided
plug does not fit into your outlet, consult
an electrician for replacement of the
obsolete outlet.
Protect the power cord from being walked on
or pinched, particularly at plugs. Unplug this
apparatus during lightning storms or when
unused for long periods of time.
Ensure that the cooling vents are not
obstructed when in use - e.g. do not cover
them with tape or labels.
WARNING: Indoor use only. To reduce the risk
of fire or electric shock, do not expose this
apparatus to rain or moisture.
Do not disassemble the unit. There are no
user-serviceable parts inside. Incorrect
reassembly may result in a safety hazard.
Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such
as supply cord or plug is damaged, liquid has
been spilled, the apparatus has been exposed
to rain or moisture, does not operate nor-
mally, or has been dropped. In this event you
should seek advice from your nearest PAG
reseller or direct from PAG Ltd. by telephon-
ing +44 (0)20 8543 3131.
SPECIFICATION
Camera Connection:
Model 9750 PAGlok connector.
Model 9750A Gold Mount connector.
Model 9750V V-Mount connector.
Input Supply:
90-264V ~ auto-selected.
Frequency 47-63Hz. Maximum power con-
sumption 175W.
Output:
15V DC, 105W nominal. The unit is
protected against over-current and short
circuit. The output is protected against over-
temperature and over-voltage by means of
a latching shutdown circuit.
PAG Ltd.
565 Kingston Road
London SW20 8SA
T
+44 (0) 20 8543 3131
E
www.paguk.com
