PackTite 2
™
ASSEMBLY AND OPERATING
INSTRUCTIONS
Patent pending heating system safely eliminates
all stages of bed bugs.
Read these instructions carefully before using this device.
For demonstrations on assembly and use,
go to the PackTite page on Facebook (www.facebook.com/packtite)
SERVICE & SUPPORT
Patent Pending
EPA Est. No. 85055
Packtite 2™ is assembled in the United States from components made in China, Taiwan and the U.S.A.
PT2 V1 03152014
In the event service of the device is required or if you have any questions,
please contact us at:
Working Voltage: 120V AC/60Hz
Amps: 12.5
Wattage: 1500W (+5%-10%)
SPECIFICATIONS
SAFETY FEATURES
1. A thermal overload protector is built in to
the heater to prevent overheating.
2. If an overheat temperature is reached,
the heater will automatically shut off. It
can only resume operation when the user
resets the unit.
To reset the heater:
1. Turn Control to OFF.
2. Unplug the unit and wait 30 minutes.
3. Plug in and operate normally.
