background image

Frequently asked questions - 65

Troubleshooting

This chapter shows you how to deal with common system problems. 

 

Read it before calling a technician if a problem occurs. Solutions to 
more serious problems require opening up the computer. Do not 
attempt to open the computer yourself; contact your dealer or 
authorized service center for assistance.

Troubleshooting tips

This computer incorporates an advanced design that delivers 
onscreen error message reports to help you solve problems.
If the system reports an error message or an error symptom occurs, 
see "Error messages" below. If the problem cannot be resolved, 
contact your dealer.

Error messages

If you receive an error message, note the message and take the 
corrective action. The following table lists the error messages in 
alphabetical order together with the recommended course of action.

Error messages

Corrective action

CMOS battery bad

Contact your dealer or an authorized service 
center.

CMOS checksum 
error

Contact your dealer or an authorized service 
center.

Disk boot failure

Insert a system (bootable) disk, then press 
<

Enter

> to reboot.

Equipment 
configuration error

Press <

F2

> (during POST) to enter the BIOS 

utility, then press 

Exit 

in the BIOS utility to 

reboot.

Hard disk 0 error

Contact your dealer or an authorized service 
center.

Hard disk 0 
extended type error

Contact your dealer or an authorized service 
center.

I/O parity error

Contact your dealer or an authorized service 
center.

F

REQUENTLY

 

Summary of Contents for EasyNote LG















































































Reviews: