background image

GENIUS 14
GENIUS 18

READ THIS BOOK

This operator’s book has important information for the use
and safe operation of this machine.  Read this book care-
fully before starting the machine.  Keep this book and tell
all operators to read the book.  If you do not follow the
instructions, you can cause an injury or damage equipment,
furniture or buildings.

For new books write to:
               

   Pacific

               2259 S. Sheridan
               Muskegon, MI  49442-6252

Carefully inspect all components to ensure that there is no
concealed freight damage.  If such damage is discovered,
file a “CONCEALED DAMAGE REPORT” immediately
with the delivering carrier.

The contents of this manual are based on the latest product
information available at the time of publication.  Pacific re-
serves the right to make changes or improvements to its
machines without notice.

FOR YOUR CONVENIENCE, RECORD THE FOLLOWING
INFORMATION:

MODEL

_______________________________

SERIAL NUMBER

_______________________

PART NUMBER

 _________________________

DATE PURCHASED 

______________________

    OPERATING & MAINTENANCE

INTRODUCTION                                             INSTRUCTIONS

Summary of Contents for GENIUS 14













Reviews: