AFX SERIES® OPERATION MANUAL
Entire Contents Copyright
2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual
Page 112 of 485
Figure 6-4: Three Phase AC mode Reversed Phase Rotation
6.4.4
Direct Data Entry - Presets
Values for Frequency, Voltage, Current, Phase and Power can be entered directly using the
numeric keypad. Position the flashing cursor on the field for which you want to enter a new
setting value. Once a field is selected, press the first key of the value you want.
As soon as you enter the first digit, the soft keys will display commonly used values for the
parameter you are changing. For example, if you are on the Frequency fields, presets for 50
Hz, 60 Hz, 400 Hz and 800 Hz will appear.
If you are on the Voltage AC field, presets for 115 V, 230 V and 300 V will appear. A Low
Voltage Range selection will be offered as well allowing you to lock in the virtual low range,
which limits AC voltage entry to no more than 150 Vac. This is illustrated on the image
below.
Direct Data
Entry preset
soft keys
Direct Data
Entry in
progress
Summary of Contents for AFX Series
Page 484: ......
