AFX SERIES® OPERATION MANUAL
SECTION 6: FRONT PANEL OPERATION
Entire Contents Copyright
2016 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual
Page 109 of 274
6.7.4
PROGRAM MEMORY Screen
The Program Memory menu allows saving and recalling of instrument setups in non-volatile
memory registers. Setups include all steady state parameters, limits, operating modes and
transient list if programmed.
Figure 6-19: PROGRAM MEMORY screen
There are 10 setup registers numbered from 1 through 10. Use the shuttle to select either
the Recall or Save field and press the shuttle to enter edit mode. Once the correct number is
selected, press ENTER to confirm.
Recall from register #
Recalls setup from selected register. If register is empty, an
error message will be displayed and no setting will be
recalled.
Note: If a register location is empty, an error message will
be displayed.
Save setup to register #
Saves setup in effect to selected register number. If this
register already contained a saved setup, it will be over-
written.
Power recall register #
Determines which register number setup is recalled at
power-up. Using this feature, the user can determine the
power-on default settings of the power source.
Summary of Contents for 3120AFX
Page 273: ......
