6
Electrician Installation Manual
EM-E Ceiling Fan
1.
Do not
attempt to operate the fan (or optional light kit) with any wall control that is not
approved by Pacific International Fans for use with its fans. DO NOT use solid state
controllers. The use of unapproved controllers will void your warranty.
2.
Do not
mix blade sets from one fan to another as this may upset the balance of the fan. If
only one blade is damaged you are still required to replace with a new set.
Assembling the fan
Fig. 7
STEP 6 (Fig 7)
a)
Attach blades to the blade holders inside the
motor housing using the 3 screws and
washers provided.
b)
Repeat this procedure for the other 3
blades.
Blade Screw
Blade Washer
Blade
Switch Cover
Reverse
Switch
STEP 7 (Fig 8)
a)
Lift the switch cover to expose the reverse switch.
b)
The reverse switch should be pushed fully to the
left for Summer (fan spins anticlockwise) and
pushed fully to the right for Winter (fan spins clock-
wise).
c)
Make the sure reverse switch is not stuck in its
neutral position otherwise the fan will not spin.
Fig. 8
