Pacific Floorcare RS28, Parts & Operating Manual, Page: 13 / 58

- 10 -
RETURN TO
TABLE OF
CONTENTS
CONTROL PANEL
Zone 1: Modes of Operation
• SCRUB ONLY : Allows the operator to run the scrub head only.
• VACUUM ONLY : Allows the operator to run the squeegee/vacuum system only.
• SCRUB : Allows the operator to run both the scrub head and squeegee/vacuum systems.
Zone 2: Operational Settings
• DOWN PRESSURE
: Increases (“+”) or decreases (“-”) the down-pressure force of the scrub head.
• SOLUTION FLOW
: Increases (“+”) or decreases (“-”) the amount of solution being dispensed at the scrub head.
• MAX SPEED
: Increases (“+”) or decreases (“-”) the maximum speed when the throttle pedal is fully pressed.
• CHEMICAL INJECTION
(OPTIONAL): Increases (“+”) or decreases (“-”) the ratio of chemical added to the solution as it is
dispensed at the scrub head
Zone 3: Machine Status
• BATTERY INDICATOR : LED display indicating current battery level and/or potential machine errors. See error indicator chart.
• SOLUTION EMPTY : LED display indicates when the solution tank is empty.
• BATTERYSHIELD
®
: On BatteryShield
®
equipped machines, LED display indicates battery maintenance is required.
• SCRUB ONLY : LED display is lit when machine is running in SCRUB ONLY to remind operator that they are leaving a wet
floor behind the machine
Zone 4: Machine Controls
• FORWARD : Enables the machine to drive forward.
• REVERSE : Enables the machine to drive in reverse.
• HORN : Press and hold to sound the horn.