5
DPM-RT-2 Operating Manual
3.3
Power Supply
The DPM-RT-2 is powered by its internal NiMH battery and may be operated while the battery is being
charged. The unit can be charged with a 60W DC power source between 9V
–
36V when the unit is powered
off, or between 12V
–
36V when the unit is powered on. The unit is shipped with a DC plug pack that can
source 24V @ 2.5A, product code DPM-RT-2-AC-LEAD. A 12V @ 5A source can also be used which can be
obtained from a cigarette lighter in a car or truck using the optional cable available from Pacifica Data
Systems Australia or your local distributor, product code DPM-RT-2-DC-LEAD.
Filter
Sample Hose
Connector
Operation / Calibration-Check Plug
Battery Charge
Connector
USB Port
Carry Handle
DPM-RT-2-AC-LEAD:
110V-240V 50/60Hz Power Lead
DPM-RT-2-DC-LEAD:
Cigarette Lighter Power Lead
