2
DPM-RT-2 Operating Manual
1.3
Intended Use
•
This testing device is a technical piece of equipment that is to be used exclusively for its intended
purpose.
•
The testing device may not be modified without the express written consent of the manufacturer.
1.4
Safety Instructions for Operation
•
The accident prevention regulations of the country in which the Particle Measurement Unit is being
operated apply.
•
The Particle Measurement Unit may not be installed and operated in hazardous locations or washing
bays.
•
The Particle Measurement Unit may only be used for its intended purpose and within its stated
performance limits.
•
The Particle Measurement Unit may only be operated by trained personnel.
•
All parts of the Particle Measurement Unit must be protected from moisture and corrosive
substances.
•
The Particle Measurement Unit and the surrounding work area must be kept clean.
•
Running vehicle engines in closed rooms represent potential carbon monoxide poisoning. The
operator/owner is responsible for providing sufficient air ventilation.
1.5
Safety Instructions for Servicing
Repair work of any kind (other than routine servicing explicitly covered in this operator manual) may only be
done by authorized service technicians. In case of non-compliance the warranty becomes void.
