9
DPM-RT-2 Operating Manual
4.5
System Info
The
System Info
screen provides a brief overview of
the DPM-RT-2 and includes the following information:
•
Model Number
•
Software Version
•
Serial Number
•
Calibration Due Date
•
If the sensor is at optimal temperature (40°C)
•
WiFi Connection Status
•
System disk, CPU and memory usage.
4.6
Stall Test
The Stall Test consists of 20s Idle, 20s Full Power and 20s Idle. Total time: 60 seconds.
4.6.1
Test Details
The test’s details
are a set of text parameters that allow you identify this
test in the list of previous results. It also allows the user to associate a
piece of equipment with the test.
Tapping on the buttons will bring up an on-screen keyboard for the user
to enter in the required information.
4.6.2
Zero Instrument
Prior to any test, the instrument initiates an auto-zero procedure, prompting the operator to ensure that the
sample probe is in relatively clean air (for instance, not directly downstream from the exhaust of an
operating engine). This procedure ensures the exhaust paths into the unit are clear from exhaust fumes.
4.6.3
Insert Probe
Insert the supplied sample probe fully into the exhaust of the vehicle or
plant under test, using the spring wire retainers to secure the probe in
position. Confirm that the engine is running and at normal operating
temperature, with the transmission engaged in accordance with the
MDG 29 procedures,
MDG 29 Test Procedures (Extract)
WiFi IP Address for accessing the
unit’s internal web portal.
WiFi Adapter MAC Address
