6
DPM-RT-2 Operating Manual
3.4
Sample Hose Connector
For easy storage, the sample hose is removable from the tail pipe probe, and the DPM-RT-2 instrument.
To separate, simply disconnect the hose by pulling back on the knurled connector.
To reconnect, push the connectors together until the sample hose clicks into place.
3.5
USB Port
The USB port can be used to download historical test data to a USB drive.
See Section 5.1 Previous Tests.
3.6
Remote Control
The wired remote-control button/LED may be connected to the 6mm jack connector at the lower right-hand
corner of the front panel. The function of the remote control is to duplicate the
ENTER
key and
LED
on the
front panel, facilitating one-person testing by allowing the instrument to be operated from the driving position
of the vehicle or equipment under test.
