Table of Contents
file:///C|/PACH%20&%20COMPANY/PACH-CO.COM/PACH-CO.COM%202011-1/online_manual/qc1-qc1ip-qc2-qc2ip_manual-2.htm[1/17/2012 3:21:55 PM]
Function Code 33 Temporary Code
The code will be expired after being used a certain amount of times specified (1-10 times) in the programming, Up to 10
temporary codes can be programmed
.
1.
2. Enter 33 then #
3. Enter 0= delete existing temporary code or 1= add temporary code then press #
4. Enter code number 01-10 then press #
5.
Enter 4-8 digit code, see digit setting on
see
for keypad layout
6. Enter name then press #
7. Enter 1= relay 1(door 1), 2= relay 2 (door 2) or 3= both relay then press #
8. Enter time zone set 1-3 then press #
9. Enter 00 (
24 hours
) - 20 see
