PACH & COMPANY QUANTUM QC Series, Manual

Page: 22 / 33

QC SERIES MANUAL
file:///C|/PACH-CO.COM-2022-B/online_manual/qc_series_manual.htm[4/27/2022 8:58:09 AM]
Function Code 34 Special Code
The code can be use to unlock hold (open hold) and use same code again to lock (close) door or gate. Up to 10 special
codes can be programmed.
1. Log-in to programming
2. Enter 34 then #
3. Enter 0= delete 1= add then press #
4. Enter code 01-10 then press #
5. Enter 4-8 digit code, see digit setting on function code 09
see Chapter 3 for keypad layout
6. Enter name then press #
7. Enter 1= relay 1(door 1), 2= relay 2 (door 2) or 3= both relay then press #
8. Enter time zone 1-3 then press #
9. Enter 00 ( 24 hours ) - 20 see function code 17 then press #
10. Enter Sat ID 0-7 then press # (enter 0 if no satellite connected to the QR5)