PACH & COMPANY QUANTUM Q9000VOiP SERIES, Manual, Page: 31 / 31

QUANTUM QVOIP SERIES MANUAL
file:///C|/PACH-CO.COM-2020/online_manual/q9000voip_series_manual.htm[1/17/2020 10:02:05 AM]
5.5 Extending Talk Time
The talk time timer is set on function code 27 . The warning beep will be heard one minute before the talk time is expired. It can be extended more another
full cycle by pressing #
5.6 Call the System from Remote Location
1. The system must be install in Intercom and Call Forwarding Mode Wiring Diagram or Call Forwarding Mode wiring Diagram
2. Function code 38 must be set at least for 1 ring
3. Function code 39 must be set to 1
4. You must have the system phone number
5. Call the system phone number if the system answered, short beep will be heard.
6. Press # then 4-digit Master code (default is 0000), short beep will be heard if master code is accepted
7. Press * to establish two ways communication
8. Press 9 to release relay 1 (door 1) or 8 to release relay 2 (door 2).
CHAPTER 6
QWCM Internet IP Module
The QWCM is only applicable for QR5IP. Click here for complete manual for QWCM
QR5 IP DEFAULT SETTING
IP: 192.168.1.230
SUBNET: 255.255.255.0
GATEWAY: 192.168.1.1
DNS: 192.168.1.1
USERNAME: Administrator
PASSWORD: 8888