PACH & COMPANY QUANTUM Q9000VOiP SERIES, Manual

Page: 29 / 31

QUANTUM QVOIP SERIES MANUAL
file:///C|/PACH-CO.COM-2020/online_manual/q9000voip_series_manual.htm[1/17/2020 10:02:05 AM]
Function Code 48 PBX Enable
If the system is installed behind a Private Branch Exchange (PBX) then 9 is necessary before dialing an outside line. If this function is enabled then the
system can only be dialing an outside line, it cannot dial the extension.
1. Log-in to programming
2. Enter 48 then #
3. Enter 0= disable or 1= enable then press #
4. Enter the number to access dial tone to dial an outside line, generally 9 is the default number for most PBX system, then press #
5. Select delay time for the PBX system to access dial tone, generally 2-3 second delay is plenty of time, then press #
Function Code 49 Edit Existing Access Code, Temporary Code and Special Code
1. Log-in to programming
2. Enter 49 then #
3. Editing an Access Code click here or
Editing a Temporary Code, click here or
Editing a Special code, then click here
Function Code 50 Erase Memory to Factory Default
Warning: This function code will erase the memory to factory default, no way to restore them unless the database has been saved in the computer.
1. Log-in to programming
2. Enter 50 then #
3. Enter 0= cancel or 1= continue then press #
Function Code 51 Welcome Screen
It consists of three segments and 16 characters for each segment