2) MULTI-SYSTEM IN SINGLE TELEPHONE LINE
Step 1
Call into the AeGIS 7000 using a touch tone phone. When the system answer you will hear:
•
One Short Beep
: Door is opened.
•
Two Short Beeps
: Door is closed.
•
One Long Beep
: Combination of Closed and open.
Step 2
Press the System Number you want to log in (1-8) then press # key.
Step 3
Press your valid Master Code.
• If your Master Code is accepted, you will hear
Two Short Beeps
and you are in the programming mode,
then proceed to Touch Tone Programming Table 3.1.
Note:
If the system idles in 30 seconds, the display will return to a scrolling mode.
• If your Master Code is rejected, the system will disconnect.
Step 4
Follow the next programming sections below to program the tenant database and parameters.
TABLE 3.1 PROGRAMMING FUNCTION CODES
*
#
00
REPLACE SYSTEM
MASTER CODE
(
Default setting is
0000
)
Master Code is used to log
on to programming mode,
not to unlock door or gate.
1. Exit the programming mode by pressing
*
once or
twice.
2. Clear the programmed name, phone number or access
code by pressing
*
3. Press
*
then the 4-digit access code to unlock the door
or gate via the system keypad.
Press # to accept program.
Step 1
Log on to programming mode (see section 3.1).
The display shows
Step 2
Enter Function code 00, then press #, the display
shows
Step 3
Enter the new 4-digit Master Code then press #
the display shows
If you press * the display shows
Ignore the message, and your existing Master
Code will remain in the system.
Step 4
Select another Function Code to program
different field from the table or press * to exit the
programming mode and you hear
“Three
Short Beeps”
.
NOT APPLICABLE.
IF PURCHASE 2004
AND AFTER.
Press # to accept program.
Step 1
Log on to programming mode,
see section 3.2. If you have
logged on. Proceed to step
2.
Step 2
Enter Function Code 00 and
press #, you will hear
“One
Short Beep”
.
Step 3
Enter the new Master Code and
press #, and you will hear
“Two
Short Beeps”
.
Step 4
Select another Function Code to
program another parameter or
press 91 then press # to
disconnect the call, you will hear
“Three Short Beeps”
.
FUNCTION CODE
LOCAL PROGRAMMING
TOUCH TONE PROGRAMMING
Pach and Company
Chapter 3
Page 8
AeGIS 7000 Series
PROGRAMMING
Select Func:
_ _
Master Code:
0000
Select Func:
_ _
ERROR DATA * * * *