8
Using your ViasatHD box
❖
Rear-panel connectors overview
Full details about connecting up and installing your box begin on page 9.
COAXIAL & OPTICAL
DIGITAL AUDIO OUT
To connect a coaxial or an optical
digital-audio lead (not supplied) to
a home cinema system
SAT IN
To connect the satellite-
signal input from the
SatCR or Universal LNB
POWER ON/OFF
When switch is
depressed, power
reaches your box.
When switch is not
depressed, your box
is in Off mode
(see page 3).
12V DC power input
Do not connect the
12 V power-supply unit
here until you have
made ALL the other
connections
AUX. SCART (in/out)
To connect to the SCART
connector on your VCR or
to connect to another item
of equipment with a SCART
output
TV SCART (out)
To connect to the SCART
connector on your TV
AUDIO L + R
(Left and right
stereo audio)
To connect
phono leads (not
supplied) to a
TV, VCR or hi-fi
amplifier
NOTE
With the exception of the telephone line, all the interconnections between the rear
panel of your box and your other equipment are safe, extra-low voltage circuits.
However, you should always disconnect your box from the power supply before
connecting or disconnecting other devices at the rear panel.
Your ViasatHD box
ETHERNET connector
To connect your box to the
Internet (optional) using the
supplied Ethernet cable
HDMI™ connector
To connect to the HDMI
connector on your high-
definition (HD) TV
USB 2.0 connector
For future use
TELEPHONE
LINE
Not currently
used
