©2022 PACE Inc., Vass, North Carolina, All Rights Reserved Page 1
General Information
Introduction
Thank you for purchasing the PACE model MBT360 Desoldering & Rework System. This manual will provide you
with the information necessary to properly set up, operate and maintain your new system, please read it
thoroughly.
The MBT360 allows for continuous use of up to three handpieces using the two AccuDrive power ports and the
SensaTemp power port. The MBT360 offers the reliability of SensaTemp and the speed of AccuDrive in a single
system.
PACE’s legendary SensaTemp technology is renowned for temperature stability and capability for high thermal
mass applications. When dealing with smaller components or situations calling for high throughput, there is
AccuDrive. The technology that boasts the best response time for high volume applications and easily keeps up
in a fast-paced environment.
The MBT360 unit is available in either 120 VAC or 230 VAC versions. The 230 VAC version system bears the CE
Conformity Marking which assures the user that it conforms to all the requirements of (EU) directive EMC
89/336/EEC & 73/23/EEC.
Specifications
Power Requirements
MBT360
- Operates on 108-132 VAC, 50/60 Hz. 300 Watts RMS at 120 VAC.
MBT360 E
- Operates on 207-265 VAC, 50 Hz. 300 Watts RMS at 230 VAC.
Physical Parameters
Size:
13.5 cm H x 16.5 cm W x 26 cm D (5.3"H x 6.5"W x 10.25"D)
Weight:
6 Kg. (13 Lbs.)
Vacuum Rise Time:
Less than 200 milliseconds to pull 254mm/Hg (10 in/Hg) vacuum on a 33 cubic
centimeter (2 cubic inch) reservoir.
Vacuum:
880mbar (26 in. Hg.) Nominal
Pressure:
28 KPa (4 P.S.I.) Nominal MAXIMUM setting
Air Flow:
9 SLPM (0.32 SCFM) MAXIMUM
Temperature Specifications
Tip Temperature Range:
38-482 °C (100-900 °F) SensaTemp, 177-454 °C (350-850 °F) AccuDrive
Digital Readout Resolution:
±1° (°C or °F)
Tip Temperature Stability:
±1.1°C (2°F) at Idle from Set Tip Temperature.
Temperature Accuracy:
Meets or exceeds ANSI JSTD 001
NOTE
Minimum and Maximum Operating Tip Temperatures as measured at the tip
may vary depending on handpiece & tip selection.
EOS/ESD Specifications
Tip-To-Ground Resistance:
Less than 2 ohms.
AC Leakage:
Less than 2 Millivolts RMS from 50 Hz to 100 MHz.
Environmental Requirements
Ambient Operating Temperature:
0°C to 40°C (32°F to 104°F)
Storage Temperature:
-40°C to 100°C (-40°F to 212°F)
