background image

- 11 - 

PACE MAKES NO OTHER WARRANTY, EXPRESS OR IMPLIED, AND MAKES NO WARRANTY OF 

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. 

 

PACE will, at PACE’s option

, repair or replace any defective products at its facility or other location approved 

by it at no charge to u

ser, or provide parts without charge for installation by the user in the field at user’s 

expense and risk.  User will be responsible for all costs of shipping equipment to PACE or other location 
for warranty service. 

 
EXCEPT FOR THE REMEDY ABOVE DESCRIBED, UNLESS OTHERWISE REQUIRED BY APPLICABLE 

LAW, PACE WILL HAVE NO OTHER OBLIGATION WITH REGARD TO ANY BREACH OF WARRANTY 
OR OTHER CLAIM WITH RESPECT TO THE PRODUCTS, OR LIABILITY FOR ANY DIRECT, 
INDIRECT, CONSEQUENTIAL, OR INCIDENTAL LOSS OR DAMAGE CAUSED BY OR OCCURRING IN 
CONNECTION WITH ANY OF THE PRODUCTS. 

 
Warranty service may be obtained by contacting the appropriate PACE Company or local Authorized PACE 

distributor as set forth below to determine if return of any item is required, or if repairs can be made by the 
user in the field. 

 
Defective products may not be returned to PACE without a Service Authorization (“SA”) Number. 
 

Any warranty or other claim with respect to the products must be made in writing delivered to PACE 
(or local Authorized PACE distributor for Buyers outside the USA and the United Kingdom) within a 
reasonable time of the expiration date of this warranty with sufficient evidence of purchase and date of 
receipt, otherwise user’s rights under this warranty shall be deemed waived. 

 
PACE, Incorporated retains the right to make changes to specifications contained herein at any time, without 

notice. 

 

The following are registered trademarks and/or service marks of PACE, Incorporated, Laurel, 
Maryland, USA and may be used to identify genuine PACE products or services.   
 

Arm-Evac

®

, Flo-D-Sodr

®

, Mini-Wave

®

, PACE

®

, SensaTemp

®

, Snap-Vac

®

, SODRTEK

SM

Sodr-X-Tractor

®

 , Thermo-Drive

®

, ThermoFlo

®

, ThermoJet

®

, ThermoTweez

®

, TOOLNET

SM

,

 

VisiFilter

®

,

 

PermaGround

®

. IntelliHeat

®.

 

 
Additional copies of this manual or other PACE literature may be obtained from:  http://paceworldwide.com 
 
 

Contact Information 

 

   

 

 

Pace Incorporated 
346 Grant Road 
Vass, North Carolina 28394  

 

Tel:  (877) 882-PACE 
Tel:  (910) 695-7223 
Fax: (910) 695-1594 
Email: [email protected]

 

 

 

 

 

 

 

 

 

 

 

 

Pace Europe 
11 Holdom Avenue 
Bletchley, Milton Keynes, 
United Kingdom, MK1 1QU 
 
Tel:  011 44 1908 277666 
Fax: 011 44 1908 277777 
Email: [email protected]

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for 8007-0572














Reviews: