Pace Technologies MEGA-T400S, Instruction Manual, Page: 7 / 30

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲
I
NSTRUCTION
M
ANUAL
MEGA - T400S
Abrasive Cutter
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 - 520 - 882 - 6598 Fax +1 - 520 - 882 - 6599 email: pace@metallographic.com Web: https://www.metallographic.com
Please read this instruction manual carefully and follow all installation, operating and safety guidelines. 2
T - slot table
LED light inside
Removable side
port for longer
feed through
samples
Pass through side panels for
long sample access
Safety lock - out
for protecting
user against
moving blade
When current setting
is exceeded, a red
flashing light appears
inside.
1. When closing the hood, press down the hood to ensure that
the safety switch is engaged .
2. After the cut has finished, if the hood lock does not release
DO NOT FORCE OPEN , try pushing down on the hood to
release the safety pin.