transmission. Watch this gauge to know
when the transmission is overheating and if
so, have it checked by an authorized
service representative.
Gearshift Lever
The gearshift is located on the right-hand
side of the steering column and can
perform the following transmission
functions:
•
Switch transmission modes
•
Upshift and Downshift
•
Activate Manual mode
Transmission Modes
Select the transmission mode by rotating
the lever outer knob. There is a position for
Drive (
D
), Neutral (
N
), and Reverse (
R
)
and for some vehicles Park (
P
).
Rotating the knob to the Park (
P
) or
Reverse (
R
) position while the vehicle is
moving forward, or to the Park (
P
) or Drive
(
D
) position while the vehicle is moving
backward, will not change the transmission
mode to those selections.
The Digital Display will indicate the
corresponding mode.
NOTE
Vehicles without a Park (
P
) mode must
be in Neutral (
N
) to start the engine.
Upshifting and Downshifting
The transmission gear can be selected
manually to accommodate the driving
needs of the operator. The Transmission
Mode must be in Drive (
D
) to manually
select the gear.
When in Automatic mode
INDICATIONS AND CONTROLS - Gearshift Lever
18
Y53-1331 (6/21)
3
Summary of Contents for TX-8
