Paccar DAF CF Driver Manual Download

Page: 183 / 375

180

Inspections and maintenance

5.2.7 Lubricating fifth wheel or trailer coupling

Lubricating the fifth wheel

DAF uses various fifth wheels. The following directions for greasing apply in general to
the fifth wheels supplied by DAF.

Standard fifth wheel

(every 5,000 km)
– Uncouple the semi-trailer.
– Clean the fifth wheel, the semi-

trailer skid plate and king pin.

– Grease the fifth wheel top plate.
– Grease the semi-trailer skid plate

and king pin lightly.

– Couple the semi-trailer and grease

the grease nipple(s) with a grease
gun.

Lubricating the fifth wheel

DAF uses various fifth wheels. The following directions for greasing apply in general to
the fifth wheels supplied by DAF.

Low maintenance fifth wheel (with
Teflon top plate liners)

(every 10,000 km)
– Uncouple the semi-trailer.
– Clean the fifth wheel, the semi-

trailer skid plate and king pin.

– Oil the Teflon top plate liners and

semi-trailer skid plate

lightly.

A thin

layer of oil prevents corrosion of the
semi-trailer skid plate and ensures a
long service life of the fifth wheel
Teflon top plate liners.

– Couple the semi-trailer and grease

the grease nipple(s) with a grease
gun.

D001692

D001693

DW63246305.book Page 180 Friday, March 22, 2019 4:54 PM

Summary of Contents for DAF CF
























































































































































































































































































































































































Search results

Summary of Contents for DAF CF

Reviews:

Related manuals for DAF CF

Brands by name

Popular brands

Paccar DAF CF, Driver Manual

Search results

Summary of Contents for DAF CF

Reviews:

Related manuals for DAF CF

Brands by name

Popular brands