PAC OS-5 Installation Manual Download Page 1

Page 1

OS-5

Radio Replacement

 with 

OnStar® 

Retention for General 

Motors Vehicles

Introduction & Features

Important Notes

Wiring Connection Chart

Illustration / Schematic

The OS-5 interface allows the replacement of a factory radio in select General Motors vehicles with 29-bit LAN radios.  

Using this interface will retain factory features such as OnStar,  warning chimes, Rear Seat Controls (RSC), factory XM 

Radio and the BOSE amplifier when the original radio is removed. The OS-5 also provides data bus driven outputs such 

as retained accessory power (RAP), vehicle speed sensor (VSS), illumination, reverse trigger and parking brake.

1. The OS-5 will retain the use of the factory XM receiver. Factory SWC or RSE controls must be present for use of this feature.
2. SWI interface must be used in conjunction for SWC retention.
3. RSC buttons that are identical to the SWC will mimic the SWC function for function.

Red / White

Parking Brake 

Output (-)

Purple / White

Vehicle Speed 

Output 

Blue

OnStar® Volume 

Adjust

Blue / White

Amp Turn On Input

Orange / White

Illumination Output 

(+)

Green

Reverse Output (+)

Brown Loop

Mute Loop - See 

installation note 7.

 Aftermarket Radio Connections

Yellow

B12v

Black

Ground

Red

Accessory Output

White

Front L + input

White / Black

Front L - input

Grey

Front R + input

Grey / Black

Front R - input

Green

Rear L + input

Green / Black

Rear L - input

Purple

Rear R + input

Purple / Black

Rear R - input

Wiring

Aftermarket 

Radio 

Connections

Vehicle 

Connections

Sub, Center Channel

& Rear Camera

Connections

XM Audio 

Connections

Connect to SWC

Interface. Program

for Version 2.

OS-R

ADPWR

AUDIO

XM R

XM L

SWC Interface 

Connections

Pacific Accessory Corporation

Reviews: