Multi Camera Input Interface
for select General Motors Vehicles
2015-2018 with 7” radio screen
© 2017 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
Page 1
Rev. 032118
MCI-GM52
The MCI-GM52 will allow the addition of a reverse, blind spot, and one more additional camera in vehicles equipped
with the 7” radio screen.
Introduction & Features
Important Notes
1. Compatible build code: IOB. Incompatible build codes: IOA, IO4, IO5, and IO6 . Build codes can be found on a silver sticker either in
the glove box or in the trunk near the spare tire well.
2. If you change the DIP switch settings, you must disconnect and reconnect power for the change to take effect.
3. It is very important that you make all connections with the key in the off position. Failure to do so will result in the factory touchscreen
becoming unresponsive. If you do make the connections with the key on, you must turn the vehicle off, shut all doors, and leave it alone
for 5 minutes. After 5 minutes, turn the key back on, and the interface should operate as intended.
4. If you are installing this interface strictly to add a reverse camera, please note that the blind spot inputs will need to be deactivated by
entering the menu and manually disabling the inputs (see page 3 for details)
What’s Included
1
2
3
4
5
1
Module
MCI-GM52
2
Power Harness
BSM2-PTH
3
Video Input harness
BSM2-CEH
4
Foam Padding
Miscellaneous
5
LVDS Connectors
Not available Separately
