INSTRUCTIONS AND PARTS LIST
TG-TALON
9/25/2020
WARNING:
Spray materials may be harmful if
inhaled or allowed to come into contact with the
skin or eyes. Consult the product label and material
safety data sheet supplied for the spray material.
Follow all safety precautions.
CAUTION:
Well
Ventilated Area Required to remove fumes, dust or
overspray.
Maximum Air Pressure 75 P.S.I.
Options for
Talon
:
Operating pressures 15-55 PSI; Maximum pressure 85 PSI. Fan aircap needs 20 PSI or more.
20-30 PSI is best for detail spraying w/ properly thinned paint
Use the higher pressures for thicker material where fine detail is not critical
or thin the paint for lower pressures.
1. Attach air hose to air supply and to airbrush. If using a regulator set pressure between 20-55 psi .
2.
Press down on Finger Button to release air and pull back on button to control quantity of color.
3.
Speed of movement controls density of color and fading effects at beginning and end of strokes.
4. Practice this movement until you can spray a fine line or a broad pattern without heavy build up at the
beginning or end of your strokes.
5.
For detail, hold the airbrush very close to the surface push down for air and pull back very slowly on
the Finger Button to release a small amount of paint.
6.
For background work and broad effects, hold the airbrush away from the work surface and pull back
on Finger Button to release required amount of color.
NO. PART
DESCRIPTION
1.
XI-41
1a.
TAF-3
Needle Protection Cap
Fan Aircap for .66mm head -
2.
*
TA-1
,
TA-2
,
TA-3
Head
(.25mm, .38mm, .66mm)
(Size TA-1 Head is used
with
size 0
and
1 Tip)
3.
*
TT-
0
,
TT-1,
TT-2
,
TT-3
Tip(.2mm,
.25mm,
.38mm,.66mm)
4.
MIL-12
“O” Ring for TG-30 Shell
5.
TG-30
Shell Assembly
6.
TG-4
Cup Cover
7.
TAL-8
Packing Assembly PTFE
8.
TAL-37
Trigger
9.
TAL-14
Valve Casing
10.
TAL-36
Valve Plunger (Includes O-ring)
10a.
A-53
(
Optional) Pack of (6) O-rings
11.
TAL-15
11a.
TAL-22
12.
A-22
17.
TAL-18
18.
MIL-11
19.
TAL-17
20.
TAL-19
21.
MIL-12
22.
TAL-
20
23.
3A-4
Valve Adapter (Includes O-ring)
(Optional) Pack of (6) O-rings
Spring
Rocker Assembly
Needle Spring
Spring Housing
Needle Lock Nut
“O” Ring
Handle
“O” Ring
*24.
TN-
0
,
TN-
1
,
TN-
2
,
TN-3
Needle
(.2mm,
.25mm,
.38mm, .66mm)
25.
TAL-35
Allen Wrench
26.
TAL-28
Wrench
* Note: Etched lines on items
2
,
3
,
and
24.
indicate size.
All
should match when installed
on airbrush.
*
*
TG Talon
– Airbrush
Double Action - Internal Mix - Gravity Feed - PTFE
Packings.
Size #
2
Needle,Tip,and Aircap Installed.
TG Specifications:
For Multi-Language Manuals go to: www.paascheairbrush.com
• Dual Action • Gravity Feed • Internal M
i
x • Cutaway Handle w/ Pre-set Needle Stop • PTFE Packing
•
TT-2, TN-2, and TA-2
Components come installed on Talon.
.2mm head (TT-
0
, TN-
0
and TA-1
components
)Great for jobs requiring the
"
extremely fine
"
detai
l
.
.
25mm head (TT-1, TN-1, and TA-1
components)
.66mm head (TT-3, TN-3 and TA-3
components
)
Great for spraying Metallics, Pearlescent and Thicker
Paints
.
.66mm Fan Aircap
(TAF-3, TN-3 and TT-3)
Will give a 2-1/2 to 3 inch flat pattern
.
Working pressure:
Airbrush Operation:
27.
TAL-33
Needle Stop
