P3Solar Dynamo PLUS Quick Start Manual Download Page 1

What’s in the Pack. . .

Innovative Satellite Solutions, LLC • 18012 Mill Creek Drive, Derwood MD 20855

 • sales

@iss-usa.net

 • www.

iss-usa.net • tel +1 (240) 720-1384

12V16Ah Battery Pack

25W Folding Solar Panel

DC Convertor

Battery Cables

MCLA Adapter

USB to 4-in-1 Adapter

Battery Pack Functions

1

2

3

4

5

6

7

8 9

10

11

1. LED illumination light

2. 19V voltage output indicator light

3. 16V voltage output indicator light

4. 12V voltage output indicator light

5. 12V/16V/19V output

6. Battery status indicator light

7. Key switch

8. USB 5V output

9. Input 12V/1A

10. Master On/Off switch

11. 200A vehicle start outlet

How can the LED emergency lighting be turned on?

KS

MS

Answer:

 

Turn the master switch, MS, to “ON” 
position. Press key switch (KS) for 3 

seconds to start the LED flashlight func

-

tion. Press KS again to turn flashlight to 
flashing. Press KS a third time for SOS 

distress light. Press KS one more time to 
turn off the light.

How can I switch between 12V, 16V & 19V output voltages?

19

16

12

KS

MS

Answer:

Turn the master switch (MS) to 
“ON” position. Press key switch 
(KS) once to illuminate the volt-
age indicator lights. Press KS again 
to toggle between the 12V, 16V, 
and 19V setting until you have 
reached the desired voltage set-
ting for your particular device. 

Note: 

Different devices have different input voltage requirements for charging. You should 

check your devices power adapter/wall chargers output voltage for the proper voltage 
setting on the portable power pack. 

How do I charge the battery from the folding solar panel?

Answer:

Step 1: 

Unfold the folding solar panel (SP) 

outside and lay on the ground flat or angled 

facing the sun. It maybe beneficial to stake 

or tie down the solar panel during operation 

to prevent it from blowing away.

Step 2:

 Plug the DC Converter (DCC) into the 

SP with the SAE automotive connector.

Step 3:

 Plug the male cigarette lighter adapt-

er (MCLA) end of the vehicle charger (VC) 

into the female cigarette lighter adapter 

(FCLA) on the other end of the DCC.

Step 4:

 Plug the barrel adapter (BA) end of 

the VC into the input 12V/1A on the battery.

Note: 

Note: The Battery Status indicator lights should 

begin flashing when charging. The Battery does not 

have to be powered on when charging.

8 Piece Adapter Set

12V Vehicle Charger

Adapter (FCLA)

AC/100V-200V Wall Charger

DCC

SP

FCLA

MCLA

VC

BA

Dynamo

 

PLUS

 Quick Start Guide

Reviews: